Vacuum bottles: lid, shoulder sleeve, vacuum pump, pist […]
Vacuum bottles: lid, shoulder sleeve, vacuum pump, piston. Use by air pressure. The nozzles used have a pointed tip (a full-plastic one is covered with an aluminum layer on the outside), and the flat head of the duckbill is covered with a layer of plastic.
Lotion bottle: by lid, shoulder sleeve, lotion pump, piston. Mostly equipped with a hose inside. Mostly outside Acrylic, inside PP material. The cover is outside the acrylic ABS. If the dairy industry is poor
Perfume : 1, the internal composition is glass external aluminum (rotating and non-rotating according to the cover head) 2, PP bottle (small injection all PP) 3, glass drip irrigation 4, perfume liner is mostly glass And PP's. Large-capacity glass is used, because of the long storage time, PP is suitable for short-term storage of small capacity. Most PCTA and PETG do not have perfume.
Cream bottle: there are cover, inner cover, outer bottle, inner liner.
1 External acrylic, internal PP material. The cover is a layer of PP gasket added to the outer acrylic ABS.
2 inner ceramics, PP externally electrochemical aluminum, aluminum outside the cover, ABS in PP plus a layer of PP gasket.
3 full PP bottle with a layer of PP gasket inside.
4 External ABS internal PP. There is a layer of PP gasket.
Blowing bottles: Most of the materials are made of PET. The cover is divided into three types: the cover, the flip cover and the screw cover. Blow molding is the direct blown of the preform. The feature is that the bottom of the bottle has a bump. Light is brighter.
Blowing bottle: Most materials are PP or PE. The cover is divided into three types: the cover, the flip cover and the screw cover. Blowing bottles are a process that combines blowing and blow molding, requiring only one mold. It is characterized by a strip of bonded lines at the bottom of the bottle.
Aluminum-plastic hose: It is the innermost part of the PE material that is made of aluminum. And carry out offset printing. Cut and then rewind. According to the tube head, the round tube, the flat tube, and the elliptical tube. Price: round tube < elliptical tube < flat tube
Full plastic hose: All are made of PE material, and the hose is pulled out first, then the offset printing, silk screen printing and hot stamping are carried out. According to the tube head, the round tube, the flat tube, and the elliptical tube. Price: round tube < elliptical tube < flat tube